Glossary
| Term | Meaning |
|---|---|
| AC791N / AC79 / WL82 | JieLi’s chip family in the FM-1 and SMK-37. “AC79” in SDK names, “WL82” in the CPU directory and the ROM’s USB name. |
| ALNK0 | The chip’s audio link (I2S-style) block; feeds the audio output by DMA. |
| App slot | The flash space for the application image: 0x8DFBC bytes from flash 0x4120. |
| BTIF | A small flash region for Bluetooth pairing data. |
| Boot stub | A small piece at the start of the app area (ChoralRoot’s: flash 0x4120…0x4FFF) that checks the firmware before starting it and falls back to update mode after a cut-off write. |
| Chip key | A 16-bit key used to encrypt the app area in flash (0x980F on known FM-1s). |
| Download mode / UBOOT | The mask ROM’s USB mode (4C4A:8057, “WL80UBOOT1.00”), for reading and writing flash with no firmware running. |
| ENC | JieLi’s simple stream cipher (CRC16-based key schedule). |
.fwsc | The firmware package file. See Firmware Package Format. |
| HSB / LSB | The high-speed and low-speed bus clocks (180 and 60 MHz at stock). Peripheral dividers are set against LSB. |
| Identity | The FM-1_nnn string a firmware or loader answers in the update handshake; installers use it to tell firmwares apart. |
| isd_config | A config blob in the boot area that encodes the chip key. |
| JLFS | JieLi’s flash directory format (32-byte entries with CRC16). |
| M-UPGRADE | M-VAVE’s updater application, and the USB-MIDI SysEx update protocol it uses. |
| Mask ROM | Code fixed in the chip. It loads the bootloader, and offers download mode. |
| NOINIT | A RAM area not cleared at start-up, so it survives a reset (crash records, boot counters). |
| P33 | The always-on power domain (power, reset, watchdog, analog settings), reached through a serial bridge. |
| pi32v2 | JieLi’s CPU architecture. Compiler target -mcpu=r3, FPU -mfprev1. |
| PLL1 | The PLL whose 540 MHz × 2/3 gives the stock 360 MHz system clock. |
| Skill | A folder of instructions (SKILL.md) that an AI coding assistant loads for a task. See AI Skills. |
| SFC | The serial flash controller that maps flash into the XIP window and decrypts it. |
| Soft key | SysEx F0 22 24 35 7D F7: asks a running firmware to enter download mode. |
SPL / bootloader / uboot.boot | The second stage after the mask ROM. It sets clocks and starts the app or the update loader. |
| SYSVDD / VDC14 | The core-and-SRAM supply and the rail it is regulated from. See Clocks and Power. |
| TransitFM1 | A silent stopover firmware for moving between two custom firmwares. |
| UFW | JieLi’s update container inside a .fwsc. |
| UPDATA_PARM | The 112-byte update record (RAM 0x01C7FD88 and flash) that makes the bootloader start the staged loader. |
| USB_KEY | A 16-bit signal on USB D+/D− at power-on that forces the mask ROM into download mode. |
| USR / USRTRIM / USRFLASH | User data regions in flash; on the SMK-37 USRTRIM holds factory calibration. |
| VM | JieLi’s key/value config store region in flash. |
| XIP | Execute in place: running code directly from flash through the cache. |
| Xrun / dropout | A block of audio not ready in time; heard as a click or a gap. |
Unofficial community wiki. Not affiliated with M-VAVE or JieLi. Text under CC BY-SA 4.0; code excerpts keep their own licences (License). Facts are tagged [HW] [SDK] [RE] [CODE] [?]: see Home. Found an error? See Contributing. Home